{"title":"Cables | Conductive Materials","description":null,"products":[{"product_id":"conductive-thread","title":"Electro-Fashion: Conductive thread (45m or 250m)","description":"\u003cp\u003eConductive thread can be used like conventional sewing thread, however it electrically conducts allowing electronics to be integrated into textiles. \u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e \u003cspan\u003e\u003cstrong\u003e(Click here for our  \u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\" target=\"_blank\"\u003efull selection of the BBC micro:bit +  essential accessories\/add-ons\u003c\/a\u003e)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is Kitronik's very own Electro-Fashion® branded Conductive Thread and we think it is among the best conductive thread available. It is perfect for hand sewing and can also be used on the bottom bobbin of a sewing machine (this will require the thread to be wound on to the smaller bottom bobbin first).\u003c\/p\u003e\n\u003cp\u003eConductive thread can be used like conventional sewing yarn, however it electrically conducts allowing electronics to be integrated into textiles. This makes it ideal for use in a range of e-textile applications.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"250\" height=\"141\" src=\"https:\/\/www.youtube.com\/embed\/FkvaVRYZaYU?rel=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e On conductive thread (3 minutes)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe thread is nano plated with silver to make it conductive\u003c\/strong\u003e. The conductive thread has a low resistance of approximately 40 Ohms per metre. This allows LEDs to be powered over quite large distances. Resistance does not vary significantly from one length of thread to the next, so you should be able to use this thread without concern for \"dead\" sections.\u003c\/p\u003e\n\u003cp\u003eThe conductive thread has a breaking strain of around 9.3 pounds (4.2 kilos). It comprises roughly 96 individual filaments, each coated with a micron-thick layer of natural silver. \u003cstrong\u003eThis plating of the yarn is done in Europe to ensure as high a quality finish as possible\u003c\/strong\u003e. In construction, 16 of these filaments are wound together to form an initial twist; two of these twists are then twisted together, and finally three of these twists are combined to form the finished thread. The conductive thread is approximately 18 denier. It is heavier than a regular sewing thread, but not as heavy as an upholstery thread. It can be sewn on most domestic sewing machines using either a regular needle or the next size up. This thread does not fray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo (or very low) fray.\u003c\/li\u003e\n\u003cli\u003eConductivity = approximately 40Ω per metre.\u003c\/li\u003e\n\u003cli\u003eCount = 875 dTex.\u003c\/li\u003e\n\u003cli\u003eStrength 3000 cN.\u003c\/li\u003e\n\u003cli\u003eElongation at break = 37%.\u003c\/li\u003e\n\u003cli\u003eTwist = 240Z-380S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Reel Electro-Fashion®, Conductive Thread,  45m. or 250m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Conductive Thread Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/2722_2724_2727_electro-fashion_conductive_thread_datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"E-Textiles Resources\" href=\"https:\/\/www.kitronik.co.uk\/blog\/resources\/e-textiles-tutorials-resources\/\" target=\"_blank\"\u003eE-Textiles Tutorials \u0026amp; Resources\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.julieboyd.co.uk\/free-resources\/free-resources\/e-textiles\/etextiles-project-tutorials.html\" target=\"_blank\"\u003eMore E-Textiles Tutorials\/video by Julie Boyd\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e E-textile for BBC micro:bit\u003c\/h5\u003e\n\u003cp\u003eSee these tutorials from the E-Textiles Tutorial section:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"BBC micro:bit Emoji bag\" href=\"https:\/\/www.kitronik.co.uk\/blog\/microbit-emoji-bag-kitronik-university\/\" target=\"_blank\"\u003eBBC micro:bit emoji bag\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"BBC micro:bit countdown pencil case\" href=\"https:\/\/www.kitronik.co.uk\/blog\/bbc-microbit-countdown-pencil-case\/\" target=\"_blank\"\u003eBBC micro:bit rocket themed countdown pencil case\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"45m","offer_id":21887050564,"sku":"2722","price":90.0,"currency_code":"HKD","in_stock":true},{"title":"250m","offer_id":21887229508,"sku":"2744","price":420.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2722_large_conductive_thread_45m.jpg?v=1469968810"},{"product_id":"electro-fashion-conductive-thread","title":"Electro-Fashion: Conductive thread (2m or 6m)","description":"\u003cp\u003e\u003cspan\u003eConductive thread can be used like conventional sewing thread, however it electrically conducts allowing electronics to be integrated into textiles. 45m length.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e \u003cspan\u003e\u003cstrong\u003e(Click here for our  \u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efull selection of the BBC micro:bit +  essential accessories\/add-ons\u003c\/a\u003e)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is Kitronik's very own Electro-Fashion® branded Conductive Thread and we think it is among the best conductive thread available. It is perfect for hand sewing and can also be used on the bottom bobbin of a sewing machine (this will require the thread to be wound on to the smaller bottom bobbin first).\u003c\/p\u003e\n\u003cp\u003eConductive thread can be used like conventional sewing yarn, however it electrically conducts allowing electronics to be integrated into textiles. This makes it ideal for use in a range of e-textile applications.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"250\" height=\"141\" src=\"https:\/\/www.youtube.com\/embed\/FkvaVRYZaYU?rel=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eOn conductive thread (3 minutes)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe thread is nano plated with silver to make it conductive\u003c\/strong\u003e. The conductive thread has a low resistance of approximately 40 Ohms per metre. This allows LEDs to be powered over quite large distances. Resistance does not vary significantly from one length of thread to the next, so you should be able to use this thread without concern for \"dead\" sections.\u003c\/p\u003e\n\u003cp\u003eThe conductive thread has a breaking strain of around 9.3 pounds (4.2 kilos). It comprises roughly 96 individual filaments, each coated with a micron-thick layer of natural silver. \u003cstrong\u003eThis plating of the yarn is done in Europe to ensure as high a quality finish as possible\u003c\/strong\u003e. In construction, 16 of these filaments are wound together to form an initial twist; two of these twists are then twisted together, and finally three of these twists are combined to form the finished thread. The conductive thread is approximately 18 denier. It is heavier than a regular sewing thread, but not as heavy as an upholstery thread. It can be sewn on most domestic sewing machines using either a regular needle or the next size up. This thread does not fray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo (or very low) fray.\u003c\/li\u003e\n\u003cli\u003eConductivity = approximately 40Ω per metre.\u003c\/li\u003e\n\u003cli\u003eCount = 875 dTex.\u003c\/li\u003e\n\u003cli\u003eStrength 3000 cN.\u003c\/li\u003e\n\u003cli\u003eElongation at break = 37%.\u003c\/li\u003e\n\u003cli\u003eTwist = 240Z-380S.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Reel Electro-Fashion®, Conductive Thread,  2m.or 6m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Conductive Thread Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/2722_2724_2727_electro-fashion_conductive_thread_datasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"E-Textiles Resources\" href=\"https:\/\/www.kitronik.co.uk\/blog\/resources\/e-textiles-tutorials-resources\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eE-Textiles Tutorials \u0026amp; Resources\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.julieboyd.co.uk\/free-resources\/free-resources\/e-textiles\/etextiles-project-tutorials.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMore E-Textiles Tutorials\/video by Julie Boyd\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e E-textile for BBC micro:bit\u003c\/h5\u003e\n\u003cp\u003eSee these tutorials from the E-Textiles Tutorial section:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"BBC micro:bit Emoji bag\" href=\"https:\/\/www.kitronik.co.uk\/blog\/microbit-emoji-bag-kitronik-university\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit emoji bag\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"BBC micro:bit countdown pencil case\" href=\"https:\/\/www.kitronik.co.uk\/blog\/bbc-microbit-countdown-pencil-case\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit rocket themed countdown pencil case\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"2m","offer_id":21887230724,"sku":"2724","price":19.0,"currency_code":"HKD","in_stock":true},{"title":"6m","offer_id":21887230788,"sku":"2727","price":28.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2724_large_electro_fashion_conductive_thread_2m.jpg?v=1469968729"},{"product_id":"electro-fashion-sewable-5mm-led-holder-pack-of-10","title":"Electro-Fashion, Sewable 5mm LED Holder, pack of 10","description":"\u003ch2\u003eSewable electronics.\u003c\/h2\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan\u003e\u003cstrong\u003e(Click here for our  \u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efull selection of the BBC micro:bit +  essential accessories\/add-ons\u003c\/a\u003e)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSewable 5mm LED Holder, pack of 10 with double-sided contacts for enhanced reliability. Ideal for any e-textiles project\u003c\/span\u003e\u003c\/p\u003e\n \n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-5\"\u003e\n\u003cp\u003e\u003ciframe width=\"250\" height=\"141\" src=\"https:\/\/www.youtube.com\/embed\/auPLMp5P9Co?rel=0\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e Sweable LED holder (2 minutes)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-7\"\u003e\n\u003cp\u003eWhen using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take any through hole 5mm LED and (after soldering in place) make them easy to use in any e-textiles project.\u003c\/p\u003e\n\u003cp\u003eJust slide the chosen LED through the holes in the middle of the board, matching the flat side of the LED to the outline on the PCB. Solder the LED into place, snip the excess length from the LED legs and you have just converted a through hole LED into an easy sewable LED board!\u003c\/p\u003e\n\u003cp\u003eThe PCBs are double sided making the thread connection very reliable, and are supplied on a panel of 10 and can be easily separated by snapping them out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlot for a \u003ca title=\"compatible LED\" href=\"https:\/\/www.kitronik.co.uk\/e-textiles-conductive-thread\/leds-for-e-textiles\/compatible-leds.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ecompatible LED\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSewable, double-sided PCB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Electro-Fashion, Sewable 5mm LED Holder, pack of 10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (per Sewable LED Holder):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePCB Length: 18mm.\u003c\/li\u003e\n\u003cli\u003ePCB Width: 8mm.\u003c\/li\u003e\n\u003cli\u003ePCB Height: 1mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch5\u003e E-textile for BBC micro:bit\u003c\/h5\u003e\n\u003cp\u003eSee these tutorials from the E-Textiles Tutorial section:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"BBC micro:bit Emoji bag\" href=\"https:\/\/www.kitronik.co.uk\/blog\/microbit-emoji-bag-kitronik-university\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit emoji bag\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"BBC micro:bit countdown pencil case\" href=\"https:\/\/www.kitronik.co.uk\/blog\/bbc-microbit-countdown-pencil-case\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit rocket themed countdown pencil case\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":21893863940,"sku":"2746","price":40.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2746_large_electro_fashion_sewable_5mm_led_holder_pack_of_10.jpg?v=1469988830"},{"product_id":"28mm-crocodile-clips-pack-of-50","title":"28mm Crocodile Clips, pack of 50","description":"\u003ch2\u003eSewable electronics.\u003c\/h2\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan\u003e\u003cstrong\u003e(Click here for our  \u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efull selection of the BBC micro:bit +  essential accessories\/add-ons\u003c\/a\u003e)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePack of 50 Crocodile Clips. Great in any science laboratory or design technology workshop involving any low voltage electrical circuit.\u003c\/span\u003e\u003c\/p\u003e\n \n\u003cp\u003ePack of 50, 28mm Crocodile Clips. Excellent for fast prototyping where removable connections are essential. Features two side notches at the back of the clip for securing to leads and wires. Available as a pack of 50 clips.\u003c\/p\u003e\n\u003cp\u003eThese miniature crocodile clips are perfect to use with conductive thread where you want to be able to make a connection to a board, but be able to easily remove the PCB. Our \u003ca title=\"BBC micro:bit Emoji Bag\" href=\"https:\/\/www.kitronik.co.uk\/blog\/microbit-emoji-bag-kitronik-university\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit Emoji Bag\u003c\/a\u003e tutorial is an excellent example of this.\u003c\/p\u003e\n\u003cp\u003eThese clips are great for using with the \u003ca title=\"BBC micro:bit\" href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/products\/bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit\u003c\/a\u003e's edge connector as they are very slim. They are ideal for prototyping. Max. current supported: 0.5A.\u003c\/p\u003e\n\u003cp\u003eRoHS Compliant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast prototyping.\u003c\/li\u003e\n\u003cli\u003e28mm clip.\u003c\/li\u003e\n\u003cli\u003eConducts up to 0.5A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 x 28mm Crocodile Clip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClip length: 28mm.\u003c\/li\u003e\n\u003cli\u003eClip Width: 5mm.\u003c\/li\u003e\n\u003cli\u003eClip Height: 10mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow voltage use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-6\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003e E-textile for BBC micro:bit\u003c\/h5\u003e\n\u003cp\u003eSee these tutorials from the \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/e-textiles-wearables-tutorials-resources\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eE-Textiles Tutorial section\u003c\/a\u003e:\u003c\/p\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-6\" p=\"\" style=\"float: left;\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/www.kitronik.co.uk\/wp\/wp-content\/uploads\/2015\/09\/bbc_microbit_emoji_bag_26_560-150x99.jpg\" style=\"float: left;\"\u003e\u003cbr\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003ca title=\"BBC micro:bit Emoji bag\" href=\"https:\/\/www.kitronik.co.uk\/blog\/microbit-emoji-bag-kitronik-university\/\" target=\"_blank\" style=\"line-height: 1.5;\" rel=\"noopener noreferrer\"\u003eBBC micro:bit emoji bag\u003c\/a\u003e\u003cspan style=\"line-height: 1.5;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan\u003eThis Kitronik University resource is part of the BBC micro:bit partnership and will be an in depth tutorial into making a BBC micro:bit emoji bag with UK student's  free sample kit. We are currently working on this project, it will be available later on this summer. In the meantime enjoy this sneak preview!\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-6\" p=\"\" style=\"text-align: left;\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-sm-6\" p=\"\" style=\"float: left;\"\u003e\n\u003ca title=\"BBC micro:bit countdown pencil case\" href=\"https:\/\/www.kitronik.co.uk\/blog\/bbc-microbit-countdown-pencil-case\/\" target=\"_blank\" style=\"line-height: 1.5;\" rel=\"noopener noreferrer\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.kitronik.co.uk\/wp\/wp-content\/uploads\/2015\/09\/microbit_rocket_800-150x150.jpg\" style=\"float: left;\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca title=\"BBC micro:bit countdown pencil case\" href=\"https:\/\/www.kitronik.co.uk\/blog\/bbc-microbit-countdown-pencil-case\/\" target=\"_blank\" style=\"line-height: 1.5;\" rel=\"noopener noreferrer\"\u003eBBC micro:bit rocket themed countdown pencil case\u003c\/a\u003e\u003cspan style=\"line-height: 1.5;\"\u003e.\u003c\/span\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"line-height: 1.5;\"\u003e\u003cspan\u003eIn this tutorial students will make their own pencil case from a template from scratch. Then following step by step instructions they will connect additional LEDs to the BBC micro:bit via conductive thread and crocodile clips, and learn how to programme the device to display a countdown\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":21894316996,"sku":"2470","price":50.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2470_large_28mm_crocodile_clips_pack_of_50.jpg?v=1469990351"},{"product_id":"miniature-28mm-crocodile-clip-leads-pack-of-10","title":"Miniature 28mm Crocodile Clip Leads, pack of 10","description":"\u003cp\u003eMiniature Crocodile Leads. Ideal for the \u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/products\/bbc-micro-bit-starter-kit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBBC micro:bit\u003c\/a\u003e.  Great in any science laboratory or design technology workshop involving any low voltage electrical circuit.\u003c\/p\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan\u003e\u003cstrong\u003e(Click here for our  \u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003efull selection of the BBC micro:bit +  essential accessories\/add-ons\u003c\/a\u003e)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eExcellent for fast prototyping where removable connections are essential. Available as a pack of 10 coloured leads (2 red, 2 green, 2 yellow, 2 black and 2 white).\u003c\/p\u003e\n\u003cp\u003eCoated with a plastic cover to enhance safety and prevent unintended shocks. These clips are ideal for prototyping and testing electrical circuits. Max. current supported: 0.5A.\u003c\/p\u003e\n\u003cp\u003eRoHS Compliant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast prototyping\u003c\/li\u003e\n\u003cli\u003ePlastic insulation for safety and durability.\u003c\/li\u003e\n\u003cli\u003e55cm long cable.\u003c\/li\u003e\n\u003cli\u003e2.8cm clip\u003c\/li\u003e\n\u003cli\u003eConducts up to 0.5A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 x Miniature Crocodile Clip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLead Length: 550mm.\u003c\/li\u003e\n\u003cli\u003eClip length: 28mm.\u003c\/li\u003e\n\u003cli\u003eWire Gauge: 14\/0.12mm (22AWG).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow voltage use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-6\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-sm-6\" p=\"\" style=\"float: left;\"\u003e\n\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":21935409092,"sku":"2407","price":30.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2407_large_clip_leads_pack_10.jpg?v=1523245343"},{"product_id":"copper-tape","title":"Copper Tape - With Conductive Adhesive, 5mm (15m)","description":"\u003cp\u003e\u003cspan\u003eFlat copper tape with conductive adhesive that is ideal for creating prototype circuits. Tape is 5mm wide by 0.035mm thick. The tape is supplied in 15m lengths.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis copper tape is 5mm wide and comes in a roll of 15m that is backed by a conductive adhesive making it the perfect choice for any projects that require precision.\u003c\/p\u003e\n\u003cp\u003eCopper tape has numerous different applications within electronics. This tape can be used for creating low profile traces for components, as RF shielding and for making antennas. It can also be used to join things together using solder, such as the glass in a Tiffany lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConductive Adhesive.\u003c\/li\u003e\n\u003cli\u003e5mm wide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Roll of 5 mm Copper Track Tape with Conductive Adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 15m.\u003c\/li\u003e\n\u003cli\u003eWidth: 5mm.\u003c\/li\u003e\n\u003cli\u003eThickness: 0.085mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":25214540680,"sku":"PRT-13827","price":45.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2477_large_copper_tape_conductive_adhesive.jpg?v=1474630558"},{"product_id":"electric-paint","title":"Electric Paint (10 ML)","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2\u003e\n\u003cspan\u003eCreate circuits with paint.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eDraw circuits and sensors with electrically conductive paint.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Electric Paint 10ml tube is a conductive ink which can be used to repair breaks, cold solder or to draw small scale circuits. Electric Paint is non-toxic, dries at room temperature, and can be applied onto any non-conductive, non-hydrophobic surfaces, like paper, plastic, textiles or wood. The Electric Paint tube is an ideal tool for applying small quantities of conductive ink. One tube can cover up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e0.5m\u003c\/strong\u003e. Electric Paint is water-soluble and can be easily removed with soap and water. For permanent applications, it can be sealed using spray varnish. Use alongside the Touch Board, Pi Cap or Light Up Board to create touch and proximity sensors.\u003c\/p\u003e\n\u003cp\u003eElectric Paint also comes in a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bare-conductive\/products\/electric-paint-50-ml\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e50ml jar\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bare-conductive\/products\/electric-paint-1-l\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e1L tub\u003c\/a\u003e. If you require the datasheets, \u003c\/p\u003e","brand":"Bare Conductive","offers":[{"title":"Default Title","offer_id":26314517192,"sku":"SKU-0025","price":110.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/IMG_8547_pen_handpaint_full_RGB300dpi_1000.jpg?v=1518974222"},{"product_id":"electric-paint-50-ml","title":"Electric Paint (50 ML)","description":"\u003ch2 class=\"p1\"\u003e\u003cspan\u003ePaint sensors, cold solder, repair PCBs, or draw a circuit with Electric Paint\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.etchkshop.com\/collections\/bare-conductive\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003echeck here for more video on Bare Conductive's Electric Paint\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBare Conductive’s Electric Paint is just like any other water-based paint, except that it conducts electricity! This means that you can paint wires or sensors directly onto almost any material\u003cspan\u003e, including paper, wood, plastic and glass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003ciframe width=\"200\" height=\"113\" src=\"https:\/\/www.youtube.com\/embed\/I0HpZRQkths\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e Nontoxic, solvent free and water soluble, Electric Paint is a great prototyping tool, and works on paper, plastic, textiles, wood, plaster, glass, and most other surfaces. Once applied the paint dries quickly at room temperature, and can be removed with soap and water.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eElectric Paint can be used like any other water-based paint, which makes it great for applications involving painting, screen printing, stencilling, or even as watercolour.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFor permanent applications, or to create multi-layer circuitry, Electric Paint can be insulated using standard acrylic or water-based paints. Want to make it more intelligent? Use it alongside microcontrollers like the Touch Board, Arduino, Raspberry Pi, MaKey MaKey, or LilyPad ....and the BBC  micro:bit.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePut this flexible, revolutionary material in your toolbox today!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eLEVEL: Beginner to Expert Engineer\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch5 class=\"p1\"\u003eInspirations\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eBare Conductive’s Electric Paint is just like any other water-based paint, except that it conducts electricity! This means that you can paint wires or sensors directly onto almost any material around you, including paper, wood, plastic and glass.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDon’t know where to begin? Here are some quick ideas on what you can do with Electric Paint\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bareconductive.com\/make\/5-things-you-can-do-with-your-electric-paint-50ml-jar\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e5 things you can do with your Electric Paint (50 ML)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eProduct sheet\u003c\/h5\u003e\n\u003cp\u003eSee official \u003ca href=\"https:\/\/www.bareconductive.com\/wp-content\/uploads\/2016\/05\/ElectricPaint_ApplicationNotes.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eElectric Paint product application note\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003eMake\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eIf you're looking for interesting application examples for the Touch Board and Electric Paint this is the place for you. Check out Bare Conductive's Tutorials, resources, or the range of projects submitted by our users.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bareconductive.com\/make\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehttps:\/\/www.bareconductive.com\/make\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Bare Conductive","offers":[{"title":"Default Title","offer_id":26316273800,"sku":"SKU-0216","price":239.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/122565_Jar_paint_brush_1000-232x152.jpg?v=1476553754"},{"product_id":"conductive-hook-loop-velcro-strip-2-5-cm-x-10-cm","title":"Conductive Hook \u0026 Loop (Velcro) Strip - 2.5 cm x 10 cm","description":"\u003cstrong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\n\u003cp\u003eHook \u0026amp; Loop strips (such as Velcro) are extremely versatile touch fasteners.\u003c\/p\u003e\n\u003cp\u003eThis 10cm long strip is perfect for E-Textile projects where you need to make a complete circuit by simply forming a connection between the hook and loop pieces. You can use this strip to light LEDs, form a simple on\/off switch, make a pair of \"velcro\" shoes even sweeter than they already are, or pretty much anything you can come up with! Use it the same way you would use conductive fabric.\u003c\/p\u003e\n\u003cp\u003eEach strip is silver-treated to make it fully conductive and is 2.5cm wide and 10cm long. Additionally, the surface resistance for both the hook and the loop is 1Ω per centimetre.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"250\" height=\"141\" src=\"https:\/\/www.youtube.com\/embed\/ioHek9cvN6U\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1Ω per cm resistance.\u003c\/li\u003e\n\u003cli\u003eSilver-treated.\u003c\/li\u003e\n\u003cli\u003eCut to required length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Conductive Hook \u0026amp; Loop Strip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 10cm.\u003c\/li\u003e\n\u003cli\u003eWidth: 2.5cm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeedle.\u003c\/li\u003e\n\u003cli\u003eScissors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Conductive thread\" href=\"http:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/products\/conductive-thread\" target=\"_blank\"\u003eConductive Thread\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":26559627848,"sku":"2740","price":60.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2740_large_conductive_hook_and_loop_strip.jpg?v=1477071686"},{"product_id":"conductive-ribbon","title":"Conductive ribbon","description":"\u003cp\u003eA great addition to any wearable electronic project, this easy to use conductive ribbon has three separate conductive strands woven into it, allowing you to transmit power, ground and signal.\u003c\/p\u003e\n\u003cp\u003eYou can solder it provided you don't have the soldering iron too hot, and it is quite flexible and durable.\u003c\/p\u003e\n\u003cp\u003eIt has very little (negligible) resistance and is made of 68% stranded tinsel wire and 32% polyester.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible conductive ribbon.\u003c\/li\u003e\n\u003cli\u003e3 separate conductive strands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Length Conductive Ribbon.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 900mm (approx).\u003c\/li\u003e\n\u003cli\u003eWidth: 5mm (approx).\u003c\/li\u003e\n\u003cli\u003eThickness: 0.7mm (approx).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":26559781192,"sku":"DEV-10172","price":72.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2739_large_conductive_ribbon.jpg?v=1477072538"},{"product_id":"audio-cable-for-bbc-micro-bit","title":"Audio Cable for BBC micro:bit","description":"\u003cp\u003e\u003cspan\u003eAudio Cable for the BBC micro:bit. Connect the crocodile clips to your BBC micro:bit and plug your headphones into the 3.5mm socket and code some music.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003eThis is the perfect cable choice for those that want to output music or general sound for the BBC micro:bit, to either headphones or speakers.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"250\" height=\"141\" src=\"https:\/\/www.youtube.com\/embed\/CyhubXdpoXE\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e 1.5 minutes video\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAt one end of the cable are the black and red crocodile clips, which connect to the microbits GND and Pin 0 respectively. At the other end of the cable is a 3.5mm TRS (tip, ring sleeve) stereo jack.\u003c\/p\u003e\n\u003cp\u003eThe 3.5mm TRS stereo jack means you can either connect your headphones directly to your BBC micro:bit or if you would rather use a speaker, you can use one of our \u003ca href=\"https:\/\/www.kitronik.co.uk\/2154-mp3-mono-amplifier-v20.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMP3 mono amplifier kits\u003c\/a\u003e to drive the speaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlthough the BBC micro:bit can supply enough current to drive a pair of headphones, you will need an amplifier if you wish to drive an audio speaker. A \u003ca href=\"https:\/\/www.kitronik.co.uk\/2154-mp3-mono-amplifier-v20.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMP3 mono amplifier kit\u003c\/a\u003e is an ideal choice as it offers both the amplifier and speaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug headphones directly onto the 3.5mm TRS stereo jack.\u003c\/li\u003e\n\u003cli\u003eCrocodile clips for direct connection to the BBC micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x BBC micro:bit Audio Cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 400mm.\u003c\/li\u003e\n\u003cli\u003eClips: 28mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":31536175816,"sku":"5622","price":22.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/5622_large_bbc_micro_bit_audio_cable.jpg?v=1488817373"},{"product_id":"twisted-jst-black-red","title":"Twisted JST Black Red","description":"\u003cp\u003e\u003cspan\u003eThis twisted 2-pin JST connector to bare wire cable is perfect for jumping from board to board and for providing more powering options for the BBC microbit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end.\u003c\/p\u003e\n\u003cp\u003eIt can be used to provide power to a microbit or to other projects from a desktop power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-pin JST connector on one end, bare cable on the opposite end.\u003c\/li\u003e\n\u003cli\u003eGreat for jumping from board to board.\u003c\/li\u003e\n\u003cli\u003eEnables you to power the microbit or project with a power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Twisted Jumper Wire - JST Black Red.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 130mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSoldering Iron.\u003c\/li\u003e\n\u003cli\u003eSolder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"4159 twisted jst black and red jst connector daatasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/4159-twisted-jst-black-and-red-jst-connector-daatasheet.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eJST connector Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":33313486600,"sku":"4159","price":11.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/4159-additional-twisted-jst-black-red-lead-power-supply.jpg?v=1491054817"},{"product_id":"crocodile-clip-with-pigtail-4-pack","title":"Crocodile Clip with Pigtail - male jumper connector (4 Pack)","description":"\u003cp\u003e\u003cspan\u003eA 4 pack of wires that are pre-terminated with a crocodile clip on one end and a hookup pigtail (male jumper connector) on the other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a 4 pack of wires that are pre-terminated with an alligator (crocodile) clip on one end and a hookup pigtail (male jumper connector) on the other. \u003cspan\u003ecrocodile \u003c\/span\u003e clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a male jumper connector to.\u003c\/p\u003e\n\u003cp\u003eEach C\u003cspan\u003erocodile \u003c\/span\u003e Clip with Pigtail cable has a wire length of 30cm (thats a little less than 1ft) and a male pin that easily inserts into a standard 0.1\" connector. Each pack consists of two red cables and two black cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese connector wires can also be used to connect a BBC micro:bit to a prototyping board as an alternative to an edge connector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWires with a \u003cspan\u003ecrocodile \u003c\/span\u003e clip on one end and a male jumper cable connector (pigtail) on the other.\u003c\/li\u003e\n\u003cli\u003eEnables you to connect a BBC micro:bit to a prototyping board as an alternative to using an edge connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Red \u003cspan\u003ecrocodile \u003c\/span\u003e to male jumper connector leads.\u003c\/li\u003e\n\u003cli\u003e2 x Black \u003cspan\u003ecrocodile \u003c\/span\u003e to male jumper connector leads.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":33314411208,"sku":"2480","price":29.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2480-large-crocodile-clip-with-pigtail-4-pack.jpg?v=1518320978"},{"product_id":"copper-tape-with-conductive-adhesive-50mm-15m","title":"Copper Tape - With Conductive Adhesive , 50mm (15m) b","description":"\u003cp\u003eThis copper tape is a whopping 50 mm wide and comes in a roll of 15 meters that is backed with a conductive adhesive.\u003c\/p\u003e\n\u003cp\u003eCopper tape has numerous different applications within electronics. This tape can be used for creating low profile traces for components, such as RF shielding and for making antennas. It can also be used to join things together using solder, such as the glass in a Tiffany lamp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConductive Adhesive.\u003c\/li\u003e\n\u003cli\u003e50mm \/ 2 inches wide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 15 meter roll of 50 mm Copper Track Tape with Conductive Adhesive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 15 meters.\u003c\/li\u003e\n\u003cli\u003eWidth: 50mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"2477_technical_data_sheet_of_copper_foil_tape datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/2477_technical_data_sheet_copper_foil_tape.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"2477_msds_copper_foil_tape\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/2477_msds_copper_foil_tape.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMaterials Safety Datasheet\u003c\/a\u003e.\u003cimg src=\"https:\/\/www.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":33317376392,"sku":"PRT-13828","price":155.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2479-large-2-inch-copper-tape-conductive-adhesive-50-foot-roll.jpg?v=1491059704"},{"product_id":"conductive-fabric-tape-patches","title":"Conductive Fabric Tape Patches","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eGet 64 swatches of conductive fabric tape, pre-cut to 0.2″x0.6″ (5mmx15mm) patches, for your projects!\u003c\/p\u003e\n\u003cp\u003eProduct benefits and usage: Whether you are just learning or a seasoned crafter, Chibitronics conductive fabric tape patches are a must-have accessory. It’s a tiny bridge of durable conductive fabric with a highly conductive adhesive on one side. Use it to patch gaps in copper tape, make T-junctions, build live hinges, or connect to our Love to Code products in a semi-permanent fashion. You can even find new life for old, used-up stickers by bridging between the shiny pads on the top side of our stickers and adjacent strips of copper tape\u003c\/p\u003e\n\u003cp\u003eUse our fabric tape to patch over small gaps in copper tape\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/chibitronics.com\/wp-content\/uploads\/2017\/07\/fabric-patch-gap-150x150.jpg\" alt=\"\" width=\"150\" height=\"150\"\u003e\u003c\/p\u003e\n\u003cp\u003e…or create a three-way “T” junction!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/chibitronics.com\/wp-content\/uploads\/2017\/07\/fabric-patch-t-150x150.jpg\" alt=\"\" width=\"150\" height=\"150\"\u003e\u003c\/p\u003e\n\u003cp\u003ePaste fabric patches over copper tape to improve reliability through repeated creasing and folding.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/chibitronics.com\/wp-content\/uploads\/2017\/07\/fabric-patch-livehinge-150x150.jpg\" alt=\"\" width=\"150\" height=\"150\"\u003e\u003c\/p\u003e\n\u003cp\u003eAfter you’ve finished testing your Chibi Chip with a craft project using the Chibi Clip, you can use fabric tape to create a flat, semi-permanent bond between the Chibi Chip and your circuit!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/chibitronics.com\/wp-content\/uploads\/2017\/07\/fabric-patch-chibichip-150x150.jpg\" alt=\"\" width=\"150\" height=\"150\"\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also use our patches to connect to worn-out LED stickers, by pasting over the top electrodes.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/chibitronics.com\/wp-content\/uploads\/2017\/07\/fabric-patch-reuse-150x150.jpg\" alt=\"\" width=\"150\" height=\"150\"\u003e\u003c\/p\u003e\n\u003cp\u003eMade out of a special nickel-plated polyester-copper weave and laminated with a conductive nickel-acrylic adhesive, our conductive fabric tape patches can make robust electrical connections that can survive creasing and hinging. As always, ensure that the metal surfaces you’re planning to sticker over are smooth and clean of oil and dirt, and that your fingers are likewise clean and dry. Dirt and oil resist electricity, so even an invisible film of dirt will degrade the reliability of any electronic sticker. Best practice is to always wash and dry your hands before applying stickers, and to use a hard pencil eraser to rub off any dirt or oil that might have built up on your copper tape before applying the fabric tape patches.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Chibitronics","offers":[{"title":"Default Title","offer_id":1817099042846,"sku":"0797776092291","price":80.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/6514_7_Amazon-2-819x1024.jpg?v=1507044698"},{"product_id":"jumper-wires-premium-6-m-m-pack-of-10","title":"Jumper Wires Premium 6\" M\/M Pack of 10","description":"\u003cp\u003eThese are 155mm long jumpers with male connectors on both ends.\u003c\/p\u003e\n\u003cp\u003eUse these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be installed next to one another on a 0.1\" header. Comes as 1 package of ten jumpers (colors shown).\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":7469543817246,"sku":"PRT-08431","price":32.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/JumperWire-Male-01-L.jpg?v=1518319826"},{"product_id":"jumper-wires-premium-6-m-m-pack-of-100","title":"Jumper Wires Premium 6\" M\/M Pack of 100","description":"\u003cp\u003eThese are jumpers terminated as male to male.\u003c\/p\u003e\n\u003cp\u003eUse these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1\" header. Comes as 1 package of one hundred jumpers (colors shown).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe pictures for this item show only 10 jumpers but this is a pack of 100 male to male jumpers. To give you an idea of what 100 of these jumpers looks like there is also a picture of 100 male to female jumpers, but again these are male to male. Pictures will be updated as soon as possible.\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":7469551681566,"sku":"PRT-10897","price":240.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/10897-01.jpg?v=1518320019"},{"product_id":"jumper-wires-premium-6-m-f-pack-of-10","title":"Jumper Wires Premium 6\" M\/F Pack of 10","description":"\u003cp\u003e\u003cspan\u003eThese are 155mm long jumpers terminated as male to female. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUse these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1\" header. Comes as 1 package of ten jumpers (colors shown)\u003c\/span\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":7469567115294,"sku":"PRT-09140","price":32.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/09140-03-L.jpg?v=1518320327"},{"product_id":"jumper-wires-premium-6-m-f-pack-of-100","title":"Jumper Wires Premium 6\" M\/F Pack of 100","description":"\u003cp\u003e\u003cspan\u003eThese are jumpers terminated as male to female. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUse these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1\" header. Comes in five packs of twenty jumpers (colors shown).\u003c\/span\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":7469581860894,"sku":"PRT-09139","price":240.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/09139-01-L.jpg?v=1518320593"},{"product_id":"grove-universal-4-pin-buckled-20-cm-30-cm-50-cm-cable-5-pcs-pack","title":"Grove - Universal 4 Pin Buckled 5 cm, 20 cm, 30 cm, 50 cm Cable (5 PCs pack)","description":"\u003cp\u003e\u003cspan\u003eThe Universal 4 Pin Buckled Cable is made for the \u003c\/span\u003e\u003ca href=\"https:\/\/www.seeedstudio.com\/s\/grovefamily.html\"\u003e\u003cspan\u003eGrove System\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e to connect all of the Twigs to the \u003c\/span\u003e\u003ca href=\"https:\/\/www.seeedstudio.com\/Grove-Base-Shield-p-754.html\"\u003e\u003cspan\u003eStem - Basic Shield \u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003eor to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm, 20cm, 30cm, 40cm and 50cm cables for different applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThe 20cm cable is in default included in the \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/products\/grove-inventor-kit-for-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eGrove - Inventor kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eFor all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through \u003c\/span\u003e\u003ca href=\"http:\/\/www.seeedstudio.com\/document\/pdf\/Preface.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003ePreface - Getting Started\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"http:\/\/www.seeedstudio.com\/document\/pdf\/Introduction%20to%20Grove.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eIntroduction to Grove\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e before your using of the product.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease visit our \u003c\/span\u003e\u003ca href=\"https:\/\/seeeddoc.github.io\/How_To_Choose_The_Right_Cable\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003ewiki\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our \u003c\/span\u003e\u003ca href=\"https:\/\/www.seeed.cc\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eforum\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Seeed","offers":[{"title":"5 cm","offer_id":7473079549982,"sku":"110990036","price":19.0,"currency_code":"HKD","in_stock":true},{"title":"20 cm","offer_id":7473094230046,"sku":"110990027","price":29.0,"currency_code":"HKD","in_stock":true},{"title":"30 cm","offer_id":7473094262814,"sku":"110990040","price":29.0,"currency_code":"HKD","in_stock":true},{"title":"40 cm","offer_id":7473094295582,"sku":"110990064","price":39.0,"currency_code":"HKD","in_stock":true},{"title":"50 cm","offer_id":7473094328350,"sku":"110990038","price":39.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/20cmbk1.jpg?v=1518369020"},{"product_id":"grove-4-pin-female-jumper-to-grove-4-pin-conversion-cable-5-pcs-per-pack","title":"Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per PAck)","description":"\u003cp\u003e\u003cspan\u003e4 pin Female Jumper to Grove 4 pin Conversion Cable is being made available based on requests from customers to use Grove modules directly with Arduino. The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Seeed’s Grove modules to any 2.54mm pitch connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrove side uses buckled connector (JST style 2.0mm pitch)\u003c\/li\u003e\n\u003cli\u003eFemale jumper is 2.54mm pitch pin header compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart List\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003e5 Cables\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDocuments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease visit our \u003c\/span\u003e\u003ca href=\"http:\/\/wiki.seeedstudio.com\/wiki\/How_To_Choose_The_Right_Cable\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003ewiki\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our \u003c\/span\u003e\u003ca href=\"https:\/\/www.seeed.cc\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eforum\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":7473136566302,"sku":"110990028","price":43.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/61dZWrCqShL._SL1024.jpg?v=1567917665"},{"product_id":"grove-4-pin-male-jumper-to-grove-4-pin-conversion-cable-5-pcs-per-pack","title":"Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable (5 PCs per Pack)","description":"\u003cp\u003e\u003cspan\u003eGrove is a convenient plug-and-play system with specialized interface, but that doesn't mean it couldn't be used in open ecosystem like breadboard. With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible \u003ca href=\"https:\/\/www.seeedstudio.com\/Base-Shield-V2-p-1378.html\" target=\"_self\"\u003eGrove - Base Shield\u003c\/a\u003e for now. If you are tinkering around Raspberry Pi, Cubieboard or Beagle Bone and be fond of the advantage of Grove, this conversion cable is recommended. And if you are tinkering around Arduino or Arduino Mega, \u003ca href=\"https:\/\/www.seeedstudio.com\/Base-Shield-V2-p-1378.html\" target=\"_self\"\u003eGrove - Base Shield\u003c\/a\u003e can be a more direct and convenient tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMore information about how to choose a cable, please refer to this \u003ca href=\"http:\/\/www.seeedstudio.com\/wiki\/index.php?title=How_To_Choose_The_Right_Cable\u0026amp;uselang=en\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emanual\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":7473159831582,"sku":"110990210","price":32.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/41Z4kxiN9DL._SX425.jpg?v=1567917427"},{"product_id":"jumper-wires-premium-6-f-f-pack-of-100","title":"Jumper Wires Premium 6\" F\/F Pack of 100","description":"\u003cp\u003e\u003cspan\u003eThese are jumpers terminated as female to female. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUse these to jumper from any male header on any board, to any other male header. Multiple jumpers can be installed next to one another on a 0.1\" header. Comes as 1 package of one hundred jumpers (colors shown).\u003c\/span\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":8036900175902,"sku":"PRT-10898","price":240.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/10898-01.jpg?v=1524061150"},{"product_id":"jumper-wires-premium-6-f-f-pack-of-10","title":"Jumper Wires Premium 6\" F\/F Pack of 10","description":"\u003cp\u003e\u003cspan\u003eThis is a SparkFun exclusive! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are 155mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can be installed next to one another on a 0.1\" header. Comes as 1 package of ten jumpers (colors shown).\u003c\/span\u003e\u003c\/p\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":8036901715998,"sku":"PRT-08430","price":32.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/JumperWire-Female-01-L.jpg?v=1524061357"},{"product_id":"sewable-miniature-coin-cell-holder","title":"Electro-Fashion Sewable Miniature Coin Cell Holder","description":"\u003cp\u003e\u003cspan\u003eThis Miniature Sewable Coin Cell Holder has large connection points for the conductive thread. These are clearly marked to show the battery polarity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis specially designed coin cell holder has large connection points for the conductive thread. These are clearly marked to show the battery polarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecially designed coin cell holder with large connection points for conductive thread.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Sewable Miniature Coin Cell Holder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 22mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 12.5mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 4mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/2269-cr1220-3v-coin-cell-pack-of-5.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCR1220 Coin Cell Battery\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"E-Textiles Resources\" href=\"https:\/\/www.kitronik.co.uk\/blog\/resources\/e-textiles-tutorials-resources\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eE-Textiles Tutorials \u0026amp; Resources\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coin cell holders in this pack contain Nickel and should not be used in designs where it will be in prolonged contact with the skin.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":12264253227124,"sku":"2718","price":11.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2718_large_electro_fashion_miniature_holder.jpg?v=1530586278"},{"product_id":"plug-cable-connector-red-green","title":"fischertechik Plug (cable connector), red or green","description":"\u003cp\u003ejoint Jumper wire or cable -\u0026gt;  fischertechnik flat plug\u003c\/p\u003e\n\u003cp\u003eFlat plug with insulation displacement connection for fischertechnik stranded wires with cross-section 14mm2\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/HxhEMcGFLfA\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"fischertechnik","offers":[{"title":"Flat plug, red","offer_id":19274497687648,"sku":"181584","price":3.0,"currency_code":"HKD","in_stock":true},{"title":"Flat plug, green","offer_id":19274507452512,"sku":"181583","price":3.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/181584-Flachstecker-rot.jpg?v=1674974602"},{"product_id":"lead-cable-red-green","title":"fischertechnik Lead (cable) red+green, 250\/ 300\/ 500\/ 1000\/ 2000\/ 4000\/ 7000","description":"\u003cdiv class=\"rte\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"rte\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp class=\"h3 productSubHeadline\"\u003eThe fischertechnik cable for sensors, motors,  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rte\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rte\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"rte\"\u003e\u003c\/div\u003e","brand":"fischertechnik","offers":[{"title":"Lead 250 mm","offer_id":19274558537824,"sku":"36210","price":28.4,"currency_code":"HKD","in_stock":true},{"title":"Lead 300 mm","offer_id":19274558570592,"sku":"36977","price":8.0,"currency_code":"HKD","in_stock":true},{"title":"Lead 500 mm","offer_id":19274583801952,"sku":"156511","price":11.6,"currency_code":"HKD","in_stock":true},{"title":"Lead 1000 mm","offer_id":19274587177056,"sku":"36382","price":18.0,"currency_code":"HKD","in_stock":true},{"title":"Lead 2000 mm","offer_id":19274587963488,"sku":"31360","price":30.0,"currency_code":"HKD","in_stock":true},{"title":"Lead 4000 mm","offer_id":19274588782688,"sku":"122409","price":85.2,"currency_code":"HKD","in_stock":true},{"title":"Lead 7000 mm","offer_id":19274590486624,"sku":"36035","price":68.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/122409-Litze-2adrig-4000mm.jpg?v=1555903167"},{"product_id":"electro-fashion-sewable-coin-cell-holder","title":"Electro-Fashion, Sewable Coin Cell Holder","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"short-description\"\u003e\n\u003cdiv class=\"std\"\u003eThis specially designed Sewable Coin Cell Holder has large connection points for the conductive thread. These are clearly marked to show the battery polarity.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clear\"\u003e\u003c\/div\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis specially designed Electro-Fashion® Sewable Coin Cell Holder from Kitronik has large connection points for the conductive thread to be sewn through.\u003c\/p\u003e\n\u003cp\u003eThese are clearly marked to show the battery polarity, in order to help you identify which side of the circuit is which.\u003c\/p\u003e\n\u003cp\u003eWe've used a very thin PCB material to keep its size to a minimum to allow it to be incorporated subtly into your own e-textiles designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge connection points for easy sewing.\u003c\/li\u003e\n\u003cli\u003eClearly marked polarity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Electro-Fashion® Sewable Coin Cell Holder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 34mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 20mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 4.5mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"CR2032 Coin Cell Battery\" href=\"https:\/\/www.kitronik.co.uk\/2262-cr2032-3v-coin-cell-pack-of-5.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCR2032 Coin Cell Battery\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"E-Textiles Resources\" href=\"https:\/\/www.kitronik.co.uk\/blog\/resources\/e-textiles-tutorials-resources\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eE-Textiles Tutorials \u0026amp; Resources\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe coin cell holder in this pack contain Nickel and should not be used in designs where it will be in prolonged contact with the skin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":20026147700832,"sku":"2701","price":11.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2701_large_electro_fashion_coin_cell_holder.jpg?v=1564848602"},{"product_id":"electric-paint-1-l","title":"Electric Paint (1 L)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 class=\"p1\"\u003e\n\u003cspan\u003ePrint large-scale sensors with paint.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003ePaint or print large sensors with electrically conductive paint.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Electric Paint 1L bucket is the easiest and safest conductive ink available on the market. Electric Paint is water-based, non-toxic and air-drying. It dries at room temperature and can be used to create sensors on most non-conductive, non-hydrophobic surfaces, like paper, plastic, textiles, wood, walls, floors, etc. Once dry, Electric Paint can be sealed using acrylic paints or spray varnishes to make it water-resistant and smudge-proof.\u003c\/p\u003e\n\u003cp\u003eThe Electric Paint 1L tub can be used with the Interactive Wall Kit, Touch Board, Pi Cap, or Light Up Board to create touch and proximity sensors. It is the perfect format for large volume screen printing projects, or for large scale installations. One 1L tub can cover approximately\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e16m²\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eElectric Paint also comes in a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bare-conductive\/products\/electric-paint\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e10ml tube\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bare-conductive\/products\/electric-paint-50-ml\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e50ml jar\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bare Conductive","offers":[{"title":"Default Title","offer_id":34563402858651,"sku":"SKU-0308","price":3253.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/1l-paint-grey_1000x500-720x415.jpg?v=1591627321"},{"product_id":"servo-to-crocodile-clip-adapter-cable","title":"Servo to crocodile clip adapter cable","description":"\u003cp\u003eIf you have a standard servo and need to connect it to a board that accepts crocodile clip connections then our new servo to crocodile clip adapter cable is the accessory for you.\u003c\/p\u003e\n\u003cp\u003eThe adapter cable features 100mm colour coded cables terminating in a male servo connector at one end and colour coded 35mm crocodile clips at the other.\u003c\/p\u003e\n\u003cp\u003eThe servo to crocodile clip adapter cable is ideal for connecting standard servos to the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/klip-motor-driver-for-bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKitronik Klip Motor Driver Board\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/bbc\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicrobit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAs an alternative, if you also need to obtain a standard servo, we do also have a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/clippable-servo-motor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClippable Servo\u003c\/a\u003e. The clippable servo is a metal gear 180-degree rotation servo that comes pre-fitted with crocodile clip connections.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis adapter cable allows you to attach a standard servo to a board that accepts crocodile connections.\u003c\/li\u003e\n\u003cli\u003eColour coded 100mm leads and crocodile connector covers.\u003c\/li\u003e\n\u003cli\u003eIdeal for use in robotics\/Buggy projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"rte text--pull product-description\"\u003e\n\u003ch4\u003ePin Assignments:\u003c\/h4\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"tg\" style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"tg-d11x\" style=\"width: 162px;\"\u003eWire Colour.\u003c\/th\u003e\n\u003cth class=\"tg-d11x\" style=\"width: 188px;\"\u003eClip Cover Colour.\u003c\/th\u003e\n\u003cth class=\"tg-d11x\" style=\"width: 162px;\"\u003eUsual Servo Assignment.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 162px;\"\u003eBrown Wire.\u003c\/td\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 188px;\"\u003eBlack Clip Cover.\u003c\/td\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 162px;\"\u003eGND.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 162px;\"\u003eRed Wire.\u003c\/td\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 188px;\"\u003eRed Clip Cover.\u003c\/td\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 162px;\"\u003e+ve.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 162px;\"\u003eOrange Wire.\u003c\/td\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 188px;\"\u003eYellow Clip Cover.\u003c\/td\u003e\n\u003ctd class=\"tg-yw4l\" style=\"width: 162px;\"\u003eSignal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Servo to Crocodile Clip Adapter Cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 135mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Requires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA suitable\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/servo-motor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eServo\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eA crocodile clip ready board such as the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/klip-motor-driver-for-bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKitronik Klip Motor Driver\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Resources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/kitronik.co.uk\/pdf\/4178-servo-to-crocodile-clip-adapter-cable-drawing.pdf\"\u003eT\u003c\/a\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/servo-motor\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eechnical Drawing\u003c\/a\u003e.\u003cimg src=\"https:\/\/resources.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":34878578884763,"sku":"4178","price":11.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/4178_large-servo-to-crocodile-clip-adapter-cable-1000_700x_fa134538-1d85-4006-9b82-ccce64cab017.jpg?v=1593912703"},{"product_id":"jst-battery-to-servo-power-adaptor","title":"JST Battery to Servo Power Adaptor","description":"\u003cp\u003eThis handy cable allows you to power some of our fantastic products quickly and easily via a LiPo battery.\u003c\/p\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/all-in-one-robotics-board-for-bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAll-in-one Robotics Board\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/kitronik-16-servo-driver-board-for-the-bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e16 Servo Driver Board\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003einclude a three pin header next to the power supply terminal where, with the help of this cable, you can attach a lithium polymer battery to quickly and conveniently power your project.\u003c\/p\u003e\n\u003cp\u003eUsing\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/kitronik.co.uk\/products\/4652-polymer-lithium-ion-battery-1ah\"\u003e1Ah 3.7 battery\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ehas never been easier than with this handy cable, which has a JST connector at one end and a three pin socket at the other.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThis JST to Servo Pin Connector has a JST connector at one end into a three-pin socket.\u003c\/li\u003e\n\u003cli\u003ePower boards such as our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/all-in-one-robotics-board-for-bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAll-in-one Robotics Board\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.etchkshop.com\/products\/kitronik-16-servo-driver-board-for-the-bbc-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e16 Servo Driver Board\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewith a Lipo battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eContents:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x JST to Servo Pin Connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eDimensions:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCable Length: 50mm.\u003c\/li\u003e\n\u003cli\u003eSee the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/resources.kitronik.co.uk\/pdf\/4176-jst-servo-connector-technical-drawing.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical Drawing\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor further dimensions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eResources:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Tech drawing\" href=\"https:\/\/resources.kitronik.co.uk\/pdf\/4176-jst-servo-connector-technical-drawing.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical Drawing\u003c\/a\u003e.\u003cimg src=\"https:\/\/resources.kitronik.co.uk\/pdf\/pdf_icon.gif\" alt=\"pdf_icon.gif\" width=\"25\" height=\"24\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":34880409272475,"sku":"4176","price":5.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/4176_large-jst-to-servo-pin-connector_700x_0addf5a6-0b89-4edb-93de-4ee5fdc488c7.jpg?v=1612708914"},{"product_id":"switch-coin-cell-holder-electro-fashion-switched-coin-cell-holder","title":"Electro-Fashion, Switched Coin Cell Holder","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"short-description\"\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread.\u003c\/p\u003e\n\u003cp\u003eThese are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off.\u003c\/p\u003e\n\u003cp\u003eIt uses a very thin PCB material to keep its size to a minimum. This allows it to be easily incorporated into your own e-textiles designs.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCaution: This coin cell holder contains Nickel and should not be used in designs where it will be in prolonged contact with the skin.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe board accepts\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/kitronik.co.uk\/2262-cr2032-3v-coin-cell-pack-of-5.html\" target=\"_blank\" title=\"Lithium 3V coin cell CR2032, strip of 5\" rel=\"noopener noreferrer\"\u003eCR2032\u003c\/a\u003e\u003ca href=\"https:\/\/kitronik.co.uk\/2262-cr2032-3v-coin-cell-pack-of-5.html\" title=\"Lithium 3V coin cell CR2032, strip of 5\"\u003e batterie\u003c\/a\u003e\u003ca title=\"Lithium 3V coin cell CR2032, strip of 5\" href=\"https:\/\/kitronik.co.uk2262-cr2032-3v-coin-cell-pack-of-5.html\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003es\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDimensions: L44 x W20 x H4.5mm\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":34881891467419,"sku":"2711","price":18.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2711_large_electro_fashion_switch_coin_cell_holder_600x_9e3aef2c-fc57-48d6-9b71-ea9c321a36c8.jpg?v=1593961635"},{"product_id":"crocodile-clip-with-pigtail-femail-jumper-connector-4-pack","title":"Crocodile Clip with female jumper connector (4 Pack)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is a 4 pack of wires that are pre-terminated with an alligator (crocodile) clip on one end and a female header connection on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a female jumper connector to.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach Alligator Clip with female header cable has a wire length of 30cm and a female connector that easily fits onto a standard 2.54mm male connector. Each pack consists of two red cables and two black cables.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese connector wires can also be used to connect a BBC microbit to a prototyping board as an alternative to using an edge connector.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWires with a alligator clip on one end and a female jumper cable connector on the other.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnables you to connect a BBC microbit to a prototyping board as an alternative to using an edge connector.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFits onto a standard 2.53mm male connector pin, such as those found on our \u003ca href=\"https:\/\/www.etchkshop.com\/collections\/bbc-micro-bit\/products\/edge-connector-breakout-board-for-bbc-micro-bit-pre-built\" target=\"_blank\" rel=\"noopener noreferrer\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/kitronik.co.uk\/products\/5601b-edge-connector-breakout-board-for-bbc-microbit-pre-built\"\u003eEdge connector for microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eContents:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 x Red alligator to female jumper connector leads.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 x Black alligator to female jumper connector leads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eDimensions:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLength: 30cm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":37827447521435,"sku":"2447","price":29.0,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0214\/4060\/products\/2447_large-alligator-clip-to-female-jumper-header-wire-4-pack_800x_a9c96953-386d-48ca-87bc-529611f7baec.jpg?v=1612081570"}],"url":"https:\/\/www.etchkshop.com\/collections\/conductive-materials\/secondary.oembed","provider":"ETC Educational Technology Connection (HK) Ltd","version":"1.0","type":"link"}